| Show Me Ornaments |
| Glass Ball Ornament
By Caron |
Paper Mache Ornament
By Caron |
 |
 |
Product needed - Clear glass
ornament - craft store
Papers - Anna Griffin from Oak Leaf Acre
Item #AG1020, AG1021, AG1019, AG1023, AG1022
Die Cut - Anna Griffin, Item #AG556
May Arts Ribbon - Item #JD5415, JD5438 |
Product needed - Paper mache
ornament - craft store
Mod Podge - craft store
Foam craft brush - craft store
Papers - Anna Griffin from Oak Leaf Acre
Item #AG1020, AG1021, AG1019, AG1023, AG1022
Die Cut - Anna Griffin, Item #AG556
May Arts Ribbon - Item #JD5415 |
| Directions - Trim paper anywhere from 1/2" to
1" width by 5" to 12" long. Take the strips
of paper and curl them small enough to put in the opening
of the glass ornament. Once you place them in the ornament,
they will uncurl some. Fill to your desire. Tie ribbon
through the top of the ornament to hang. Punch a hole
in the die cuts and tie around the ornament with ribbon. |
Directions - Take your paper and tear it into small
pieces. The smaller, the better. Using your foam brush
and the mod podge, apply the small pieces to the ornament.
Put a small amount of mod podge only in the area where
you are applying the paper, place the paper on the ornament,
then cover again with mod podge. Use your fingers to smooth
out any wrinkles in the paper. Once the ornament is covered,
set aside to dry. Place ribbon around the top of the ornament.
Punch a hole in the die cut and place through the hanger
on the ornament. |
| Wooden Stocking Ornament by Caron |
Wooden Mitten Ornament By Caron |
 |
 |
Product needed - wooden ornament
from craft store
liquid glue
Papers - Anna Griffin from Oak Leaf Acre
Item AG1019, AG1021
Die Cut - Anna Griffin, Item #AG556
May Arts Ribbon - Item #JD438 |
Product needed - wooden ornament
from craft store
liquid glue
Papers - Anna Griffin from Oak Leaf Acre
Item #AG1011, AG1012
Die Cut - Anna Griffin, Item #AG554
May Arts Ribbon - Item #NM1758 |
| Directions - Use your
wooden ornament as a template to trace a pattern on your
paper. Cut the shape out of your paper and apply paper
to the ornaments using liquid glue. Take the snowflake
ornament and punch two small holes in it to tie ribbon
through. Attach die cuts to ornament. |
Directions - Use your
wooden ornament as a template to trace a pattern on your
paper. Cut the shape out of your paper and apply paper
to the ornament using liquid glue. Glue Die cut on the
front of the ornament. |
| Layered Star By Amy Wiff |
Christmas Joy Frame By Amy
Wiff |
 |
 |
| Cut following squares and
alternate while adhering. 4"X4" Solid Red Bazzill (Pomegrante)
3.75"X3.75" Anna Griffin 3.5"X3.5" Anna Griffin Stripe
3.25"X3.25" Solid Red Bazzill (Pomegrante) 3"X3" Anna
Griffin 2.75"X2.75" Anna Griffin Stripe 2"X2" Solid Red
Bazzill (Pomegrante) May Arts
Ribbon Diecut Anna Griffin Rose
Add ribbon and holly diecut on
top. |
Adhere Anna Griffin paper
to back of red frame. Tie on ribbon before adhering the
ribbon. Add picture and small green frame. Rob-on word
Christmas (Rub-on Sentiments - Royaland Langnickel Brush
Mfg.) Add metal star and word (Making Memories). Punch
holes at top to add ribbon for hanging. |
| Stocking by Amy Wiff |
Tree by Amy Wiff |
 |
 |
| Trace stocking pattern on to Anna Griffin paper. Trace
onto chipboard. Glue patterned paper to chipboard. Use
different patterns for top and bottom of stocking. Ink
edges with sepia/borwn ink. Tie with ribbon. Use Anna
Griffin Border Sticker/Rose as the ornament hanger. Add
metal star (Making Memories) and name. |
Trace tree pattern on paper and clipboard. Glue together.
Ink around edges (brown/sepia). Cover with Paper Glaze
(Aleene's). Sprinkle with small red, green and silver
beads and glitter. Top tree with star. Let dry overnight.
Tie with ribbon to hang. |
| Fan By Amy Wiff |
Downloadable Ornament Patterns |
 |
|
| Cut paper into 6"X12". Trim long edge with
decorative scissors and small hole punch. Fold into a
fan pattern about 1/2" folds. Punch hole in bottom
of fan and thread ribbon through hole and tie. Wrap pipe
cleaner around bottom and tie ribbon around pipe cleaner
to hide pipe cleaner. Loop other ribbon three times and
adhere top with holly diecut. |
Click on each pattern to view a printable
PDF file. |
| Christmas Cracker By Barbara |
Tree Tag By Barbara |
 |
 |
1 - 12"X6" AG1012 Elsie Holly
1 - 2.25"X6" AG1010
Elsie Green Snow
1 - 2"X6" AG1013 Elsie Solid
Quilt
1 - AG443 Elsie 4 in 1 Frames Title
PLA45SNF Anna
Griffin Snowflake Punch
2 - 18" May Arts Ribbon
1
- empty toilet paper tube |
1 - 3"X5" T5-569 Green Bazzill Cardstock
1 - 2.75"X4.75" AG1015 Margot Presents
1 - AG1014
Margot Candy Cane
1 - AG1017 Margot Solid Quilt
1 - AG555
Margot Presents Diecuts
1 - AGM101-S01 Margot Alphabet
Stickers
1 - PLA79TLK 6" May Arts Ribbon |
| Punch snowflakes into AG1013. To achive
continuous pattern, make first punch at one end, then
overlap punch half way through previous punch out. Glue
punched strip to AG1010. After glue dries, attach to center
of AG1012 with short sides matched to 12" sides.
Wrap around tube. Adhere with double sided tape. Tie ends
with ribbons 2" in from each end. Tie title in with
one ribbon. You might want to make several, filling them
with candies to give to visiting guests. |
Round corners on cardstock and AG1015.
Adher AG1015 to cardstock and punch a hole at one end
for ribbon. Cut out one large tree from AG1014 and adher
to tag. Punch out blue and pink packages from diecut and
adhere with pop dots. Adhere a small green rectangle of
AG1017 to top half to highlight charm and name. Tie charm
with ribbon at top, add sticker name. |
| The Christmas Box
by Barbara |
Three Tier Tree By Barbara |
 |
|
1 - AG1009 Elsie Snowflakes
May Arts Ribbon |
1 - 6" Circle AG105 Holly Botanical
1 - 5" Circle AG050 Red Ornament
1 - 4" Circle
AG051 Green Ornament
1 yrd May Arts Ribbon |
| Use small jewelry boxes to wrap with Anna
Griffin paper and finish with a bow. |
Punch a hole in the center of each circle
and cut out 1/4 pie shape. You should have three 3/4 circles.
Tie a knot six inches up from the bottom of ribbon. Form
cone shape with largest circle just above knot and secure
with glue or two sided tape. Tie second knot one inch
above large cone. Form cone shape with 5" circle
and adhere just about second knot. Tie thrid knot one
inch above second cone. Form cone shpe with smallest circle
and adhere just above third knot. Tie loop to hang. |
| Victorian Cone By Barbara |
Star of Bethlehem By Barbara |
 |
 |
| Glue 8"X8" squares back to back and let dry.
Roll in cone shpe letting one corner be your bottom point.
Adhere with double sided tape. Attach holly 3-D die cut
with two sided tape and glue dots. Punch one hole on each
side at top and tie a bow on one side, leave enough ribbon
for hanging, then tie end in bow on opposite side. |
5 - 2"X5.5" T5-589 Green Bazzell Cardstock
5 - 1.75"X5" AG833 Red Stripes 5 - 1.5"X4.5" AG821
Petite Holly
Fold cardstock peices in half 2" end to 2" end.
Glue backs of cardstock peices together forming a five
pointed star. Fold AG833 and AG821 peices end to end.
Attach AG833 peices to cardstock star one at a time adhereing
on the ends only. After glue has dried, attach AG821
peices on top of the AG833 on the tips of the ends only.
Punch a hole on the top point and finish with a pretty
ribbon to hang.
|
| Song Bird By Barbara |
Angel Watching Over Me By Barbara |
 |
 |
1 - White Bazzill Cardstock
1 - AG1017
Margot Solid Quilt
1 - AG1018 Margot Red Dots |
1 - White Bazzill Cardstock
1 - AG1010
Elsie Green Snow
1 - AG639 Elsie Holiday Border Stickers
1 - AG554 Elsie Tree Diecut
1 - AG1012 Elsie Holly |
| Using bird pattern, cut one from cardstock,
and one from AG1017. Cut 1/4" strips of AG1018 for
tail, wings and crown. Tail 3 - 6" loops, wings 2
- 5" loops, and crown 3 - 3" loops. Attach loops
with Making Memories snaps. Finish with a button for an
eye. This project would be great for a family get-together.
Have birds cut out ahead of time and let your guest decorate
as the desire. |
Using angel pattern, cut one angel, plus
extra set of arms, from AG1010 and one angel minus the
feet and arms from cardstock. Use AG639 to make trim along
bottom of dress. Punch out one tree diecut from AG554.
Cut one three leaf holly from AG1012 and adhere to tree.
Make a four loop bow with ribbon and staple to back of
carstock angel. Attach arms to back of arms on AG1010
angel, then dhere green angel to front of cardstock. Fold
arms around to front of angel and adhere finger tips with
double sided tape. Attach tree to hands. Punch top of
angel with small hole for hanging. |
