For Best results please read all instructions
before beginning
the class. Square brackets
[ ] indicate
notes from OakLeaf Acre.
Use Grace’s unique
photo slides for a fun way to fit twice as many of
your favorite photo moments on your scrapbook pages.
Use the journaling space to create a story that will
coordinate with your slide show.
Tools: Ruler Pencil Scissors
and/or craft knife and mat Hole punch Scoring tool
Decorative scissors Adhesive Foam adhesive
Click image for a larger
picture.
Class # 421 Grace’s
Photo Slide Show
Step 1
`Cut a 4" x 12" piece
of AG1064 Floral. Cut a 1/2" x 12" strip
of AG1065 Burgundy Roses. Adhere it to the center
of the AG1064 Floral piece.
Cut two 3" x 5" pieces
of AG1056 Blue Lattice. Adhere these to the top of
the AG1064 Floral piece.
Measure and mark 1/8" in
around the sides of each of these blue pieces.
Cut out the centers of
the blue pieces, through the floral paper as well.
These make the windows
for your pull out section.
Step 2
Use a
hole punch or a circle template to remove a half
circle from the top center of this paper section.
This allows room for the ribbon on the pullout section.
Step 3
Adhere this window to the left
side of a sheet of AG003 Green Plumes; be very careful
to use adhesive only on the right and left edges
of the paper so that you have room for the pull
out.
Step 4
Cut a 3 1/4" x 12" piece
of AG1060 Ivory Lattice and of ivory cardstock. Adhere
the patterned paper onto the cardstock.
Punch a hole into
the top center of the paper.
Cut the green ribbon
provided into two pieces.
Thread one piece
through the hole in the top of the Lattice paper
and tie it in a knot. Trim ends.
Step 5
Insert the Lattice paper piece into the space
under the floral paper. If there is any trouble
fitting, you might have to check your adhesive placement
or trim some paper from the sides of the insert.
When you want to place photos on the insert, pencil
in the openings with the insert in place. Then,
remove the insert and place your photos.
Step 6
Cut a 1/2" x 12" strip of AG1065 Burgundy
Roses. Adhere this next to the Floral piece.
Step 7
Cut a 5 1/2" x 7 1/2" piece of AG1056
Blue Lattice paper. Cut a 5 3/4" x 7 3/4" piece
of Ivory Lattice paper. Layer the blue paper onto
the ivory and adhere this mat to the page.
Step 8
Cut a 3 3/4" x 2 3/4" piece of ivory
cardstock. Cut a 4 x 3 piece of AG1065 Burgundy
Roses. Adhere the cardstock to the Burgundy Roses
paper. Adhere this to the page as shown for journaling.
Done!
Click image for a larger
picture.
Class # 421 Grace’s
Photo Slide Show
Step 1
Cut a 7" x 12" piece of
AG1064 Floral. Cut two 5 1/2" x 4" pieces
of AG1056 Blue Lattice. Adhere these to the top of
the AG1064 Floral piece.
Measure and mark 1/8" in
around the sides of each of these blue pieces.
Cut out the centers of the blue pieces,
through the floral paper as well.
These make the windows for your pull
out section.
Step 2
Use a hole
punch or a circle template to remove a half circle
from the top center of this paper section. This
allows room for the ribbon on the pullout section.
Step 3
Adhere this window to the right
side of a sheet of AG003 Green Plumes; be very careful
to use adhesive only on the right and left edges
of the paper so that you have room for the pull out.
Step 4
Cut a 6" x 12" piece
of AG1060 Ivory Lattice and of ivory cardstock. Adhere
the patterned paper
onto the cardstock.
Punch a hole into the top center of the paper.
Cut the green ribbon provided into
two pieces. Thread
one piece through
the hole in the top of the Lattice paper and tie
it in a knot. Trim ends.
Step 5
Insert the Lattice paper piece into
the space under the floral paper. If there is any
trouble fitting, you might have to check your adhesive
placement or trim some paper from the sides of the
insert.
Step 6
Cut a 1" x 11" piece of
AG1060 Ivory Lattice. Cut the ends into a dovetail.
Adhere this to the center of the section of AG003
Green Plumes that is visible.
Step 7
Cut three 3" x 3" squares
of AG1065 Burgundy Roses. Adhere them on top of the
strip of AG1060 Lattice, centering them on the page.
Cut [two] 2 3/4" x 2 3/4" squares
of AG1064 Floral
print and one
2 3/4" x 2 3/4" square
of ivory cardstock.
Adhere the ivory
cardstock to
the center square
and the Floral
print squares
to the top and
bottom squares.
Done!
Click image for a larger
picture.
Class # 421 Grace’s
Photo Slide Show
Step 1
Cut a 9" x 6 1/4" piece
of cardstock. Score it and fold it so that it makes
a 4 1/2" x 6 1/4" card. Cover the card
with AG003 Green Plumes.
Step 2
Cut out the flower bunch
from AG1055 and adhere it to the front of the card
with foam adhesive. Add any details from the rest
of AG1055 if you wish and adhere with foam adhesive
as well.
Step 3
Cut a 1 3/4" x 10" piece
of AG1060 Ivory Lattice. Cut a 2 1/4" x 10" piece
of AG1065 Burgundy Roses. Adhere the Ivory Lattice
to the Burgundy Roses piece.
Trim the edges of the
Burgundy Roses paper with decorative scissors.
Adhere the
strip around the card, using foam adhesive on the
front.
Step 4
Adhere the woven Party label to the front of the
card.
